Local Full House Repipe

Plenty of plumbers will tell you they deliver quality, but with Super Brothers Plumbing, you’ll see it for yourself—in every cleanly run line, every perfectly sealed joint, and every detail handled with care.

We treat your home’s plumbing as if it were our own, applying years of hands-on experience, proven techniques, and industry knowledge to ensure lasting results. From the first shut-off valve to the final fixture, nothing is left to chance.

Across Sacramento and the Bay Area, our name is known for professional service, exceptional craftsmanship, and respect for your budget. Whether you need a partial repipe or a complete overhaul of your home’s plumbing system, you can count on Super Brothers Plumbing to deliver reliable solutions that stand the test of time.

Top Rated Repipe Company

When it comes to something as important as your home’s plumbing, you deserve more than just “good enough.” At Super Brothers Plumbing, we handle every repipe with care—using top-quality materials, proven techniques, and a skilled team that gets it right the first time.

From the moment you call, you’ll notice the difference. We show up on time, protect your home while we work, keep you informed every step of the way, and make sure the job is done right before we leave.

If your pipes are old, leaking, or causing ongoing problems, we’ll replace them with a system you can depend on for decades. Homeowners throughout Local and the Bay Area trust us for honest advice, fair pricing, and long-lasting results.

Copper Repipe

A copper repipe replaces the aging water lines inside your home with new Type L copper and lead-free fittings. If you’ve been dealing with rusty water, low pressure, pinhole leaks, or constant slab leaks, a repipe is a permanent fix—not another band-aid.

Most homes we see need a repipe because the original pipes are corroding from the inside out. That corrosion narrows the pipe, which hurts water pressure and can send brown or metallic-tasting water to your faucets. New copper restores flow, improves taste, and gives you a system built to last for decades.

Type L copper (the thicker, long-lasting grade), new quarter-turn shutoff valves at each fixture, new supply lines, proper seismic and code-approved strapping, and clean, professional solder joints. Where it makes sense, we insulate hot-water lines we can reach to help your water stay hot longer.

We map your plumbing, protect floors and furnishings, and make small access openings in walls or ceilings to reach pipes. We keep your water on as much as possible and schedule the brief shutoffs so you’re never without water overnight. When we’re done, we pressure-test the system, flush it clean, and walk the home with you before we pack up.

Serving Sacramento and the Bay Area: from older bungalows to newer builds, we’ve repiped homes across the region. We know the local water conditions, typical construction styles, and permit requirements in each city, which helps the job go smoothly.

We’ll inspect your system, tell you exactly what we see, and let you know if a full repipe is truly necessary—or if a targeted repair makes more sense.

Pex Repipe

A PEX repipe replaces the old water lines in your home with flexible, high-grade cross-linked polyethylene. If you’re fighting low pressure, rusty water, pinhole leaks, or recurring slab leaks, PEX is a clean, durable fix that won’t corrode and won’t scale up inside.

PEX is quiet, resists mineral build-up, and handles temperature swings well. Because it bends around corners, we can make longer runs with fewer fittings behind the walls. That means fewer potential leak points and a faster, cleaner install.

We use top-tier PEX-A with brass expansion fittings, quarter-turn shutoff valves at every fixture, and copper or drop-ear stub-outs where it makes sense for a solid connection at valves and faucets. In many homes we set up a central manifold so sinks, showers, and appliances can be isolated individually. Hot-water lines we can reach are insulated to help keep water hot and reduce wait times.

Local Sewer Line Repipe

A sewer line repipe replaces the old main drain from your home to the street (or septic) with new, code-approved pipe. If you’re dealing with repeat backups, slow drains, bad odors, or a soggy spot in the yard, the sewer line is usually the culprit—often from roots, bellies (sags), collapsed clay, failing cast iron, or brittle Orangeburg.

To diagnose we run a camera through the line and locate exact problem spots with a tracer. You’ll see the footage, so you know what’s going on before we talk options. If a full replacement isn’t needed, we’ll tell you.

Schedule 40 PVC for building drain transitions and SDR-rated PVC or HDPE where appropriate outside the footprint. Solvent-welded or fused joints, proper bedding and backfill, and a clean, consistent fall so waste flows the way it should. We add properly placed cleanouts (usually two-way) and can install a backwater valve if your site and code call for it.

To start the job we mark utilities, protect your property, and set up safe access. If trenchless is used, you’ll see small access pits at the start and end of the run. With open trench, we keep the trench neat, shored as required, and fenced off. We keep at least one bathroom usable as long as possible and schedule any necessary shutoffs to the shortest windows.

Local Gas Line Repipe

A gas line repipe (gas piping replacement) updates the fuel lines that feed your furnace, water heater, range, dryer, and fireplaces. If you smell gas, have repeated pilot outages, corrosion on old black iron, or appliances starving for fuel, it’s time to take a serious look. Gas work is about safety first—done right, it’s quiet, efficient, and worry-free for years.

We start with a full visual and pressure test of the system, check appliance BTU loads, and verify pipe sizing and routing. If we find issues, you’ll see exactly what and where, and we’ll explain the options in plain English.

We install code-approved materials matched to your home—typically new black iron/steel for main trunks and branches, bonded CSST where flexibility makes sense, and polyethylene (PE) with risers and tracer wire for any buried sections. Every appliance gets an accessible shutoff valve, sediment trap (drip leg), and a proper, listed stainless-steel connector. We correct unsafe fittings, add protection plates where pipes pass through studs, and label key shutoffs.

We also calculate total BTU demand and route the system to deliver the right pressure to each appliance—even when multiple fixtures run at once. No more “stove drops when the furnace kicks on.”

Local Drain Line Repipe

A drain repipe replaces the old drain, waste, and vent (DWV) piping inside your home—the lines that carry used water from sinks, tubs, showers, and toilets out to the main sewer. If you’re living with slow drains, gurgling sounds, sewer odors, or ceiling stains from hidden leaks, the drain system is usually to blame. A proper repipe fixes the root causes, not just the symptoms.

How we diagnose it: we scope problem lines with a camera, check slopes, look for corrosion and cracks, and verify that fixtures are vented correctly. If a full repipe isn’t needed, we’ll tell you and price a targeted repair.

What we install: code-approved Schedule 40 ABS or PVC (depending on your city’s standard) with long-sweep fittings, shielded no-hub couplings, and cleanouts where they should be. In noise-sensitive spots—like vertical stacks through living areas—we can use cast iron for a quieter home. Every connection is supported with proper hangers, protected with nail plates through framing, and sealed with fire-stopping where lines pass between floors.

Many “mystery” slow drains and gurgles come from poor venting. We re-vent fixtures correctly to keep traps sealed and odors out. Where local code allows, we can use air admittance valves in tight spaces; otherwise, we run a proper vent to the roof.

We protect floors and furnishings, map your system, and make small access openings in walls, ceilings, or cabinets to reach the lines. We schedule short “no drain use” windows and keep at least one bathroom working as long as possible. Before we close anything up, we water- or air-test the new piping per code and run every fixture with you.

Repipe Company Near Me

When you search for a “repipe company near me,” you want a local team you can trust — one that delivers excellence without the guesswork. That’s exactly what you’ll get with Super Brothers Plumbing: fast service, expert craftsmanship, and transparent pricing right in your neighborhood.

Every project starts with a friendly phone call and ends with clean, reliable plumbing. Our licensed technicians respect your home, work efficiently, and keep you informed on what’s happening every step of the way, so you can stay comfortable throughout the process.

Whether you’re dealing with corroded water lines, deteriorating sewer pipes, outdated drain plumbing, or older gas systems — we offer tailored solutions that stand the test of time. Local homeowners throughout Local rely on us for straightforward advice, fair pricing, and long-lasting results.

Choosing a trusted company nearby means faster response times, better familiarity with local codes, and a team that cares as much about your home as you do. Let’s upgrade your plumbing systems and give you peace of mind for years to come.

Local Repipe Contractor

Updating your home’s plumbing is a big decision, and choosing the right contractor makes all the difference. Our team specializes in whole-house repiping, using durable materials and proven installation methods to restore reliable water flow and protect your property for years to come.

From the first call, we focus on clear communication and straightforward pricing—no hidden fees or surprises. During the project, we treat your home with care, complete work efficiently, and ensure everything is left clean and functional.

Whether you’re dealing with leaks, low water pressure, or aging pipes, we provide practical solutions tailored to your home. Homeowners in your area trust us for quality craftsmanship and long-lasting results.

Signs It’s Time for a Full House Repipe

Wondering if your plumbing is past its prime? Pipes don’t last forever, and ignoring the warning signs can lead to costly water damage. Here are some of the most common indicators that it may be time to repipe your home:

Rusty or discolored water: Corrosion inside old pipes releases rust particles that turn your water brown or reddish.

Frequent leaks: If you’re constantly calling for pipe repairs, replacement may be more cost-effective than patchwork fixes.

Low water pressure: Mineral buildup or failing galvanized pipes restrict water flow, leaving your showers and faucets weak.

Kitec or outdated piping: Certain pipe materials like Kitec or polybutylene are known to fail prematurely and should be replaced before they burst.

Aging plumbing: If your home’s piping is several decades old, chances are it’s nearing the end of its service life and due for replacement.

Not sure if your home needs a full repipe? Our team can inspect your plumbing system and give you clear, honest recommendations.

Our Repipe Services Guarantee

When you trust us with your Local home’s repipe, we back our work with a solid guarantee that ensures peace of mind from start to finish. Our team uses only high-quality piping materials designed to last for decades, installed with precision and care by licensed professionals.

We guarantee clear, upfront pricing with no hidden fees, so you’ll always know exactly what to expect before work begins. From protecting your home during installation to cleaning up after the job is done, our technicians treat your property with the utmost respect.

Every repipe project is completed to meet or exceed local building codes, and we stand by our workmanship with a warranty you can rely on. If any issues arise, we’ll be there to make it right.

With our promise of quality, reliability, and customer care, you can be confident that your new plumbing system will provide dependable performance for years to come.